Wxe-50ned-a Fuente de alimentación de conmutación de salida dual

Modelo N °: WXE-50NED-A Garantía:> 2 años Voltaje de entrada: 24 V Modo de arranque: autoexcitado Fuente de alimentación conmutada Sistema de suministro de energía: Terminal Distribución de energía Equipo Sistema de modulación: PFAW Marca: Omwo Especificación: 159 * 98 * 38 mm HS Código: 8504401990 Tipo de salida: Única Potencia de salida: 1 - 50W Modo de conexión: Serie Cambio Voltaje de fuente de alimentación Modo de regulación: Tipo de modulación de frecuencia Transmisión de energía: Transmisión bidireccional Certificación: CE, UL, RoHS, ISO, CCC, CB, CSA Marca : OMWO Origen: Zhejiang WXE-35NED-B \ n * Entrada de CA universal / Rango completo \ n * Protecciones: Cortocircuito / Sobrecarga / Sobretensión \ n * Enfriamiento por convección de aire libre \ n * 100% de carga total en prueba de combustión \ n * 2 años de garantía

MODEL		WXE-35NED-A		WXE-35NED-B
OUTPUT	OUTPUT NUMBER	CH1	CH2	CH1	CH2
	DC VOLTAGE	5V	12V	5V	24V
	CURRENT RANGE	0.5 ~ 5A	0.1 ~ 1.5A	0.5 ~ 4A	0.2 ~ 1.3A
	RATED CURRENT	4A	1A	2.2A	1A
	RATED POWER	32W		35W
	RIPPLE & NOISE (max.)  Note.2	80mVp-p	120mVp-p	80mVp-p	200mVp-p
	VOLTAGE ADJ. RANGE	CH1: 4.75 ~ 5.5V		CH1: 4.75 ~ 5.5V
	VOLTAGE TOLERANCE NOTE.3	2.0%	6.0%	2.0%	6.0%
	LINE REGULATION	0.5%	1.0%	0.5%	1.0%
	LOAD REGULATION	1.5%	3.0%	1.5%	3.0%
	SETUP, RISE TIME NOTE.5	500ms, 30ms/230VAC   1200ms, 30ms/115VAC at full load
	HOLD UP TIME (Typ.)	50ms/230VAC    10ms/115VAC at full load
INPUT	VOLTAGE RANGE	85 ~ 264VAC   120 ~ 370VDC
	FREQUENCY RANGE	47 ~ 63Hz
	EFFICIENCY (Typ.)	78%		81%
	AC CURRENT (Typ.)	0.75A/115VAC   0.5 A/230VAC
	INRUSH CURRENT (Typ.)	COLD START 45A
	LEAKAGE CURRENT	<2mA / 240VAC
PROTECTION	OVER LOAD	110 ~ 150% rated output power
		Protection type : Hiccup mode, recovers automatically after fault condition is removed
	OVER VOLTAGE	CH1: 5.75 ~ 6.75V
		Protection type : Shut down o/p voltage, re-power on to recover
ENVIRONMENT	WORKING TEMP.	-20 ~ +60oC (Refer to output load derating curve)
	WORKING HUMIDITY	20 ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40 ~ +85oC , 10 ~ 95% RH
	TEMP. COEFFICIENT	0.03%/oC (0 ~ 45oC )
	VIBRATION	10 ~ 500Hz, 2G 10min./1cycle, period for  60min. each along X, Y, Z axes
SAFETY &EMC(Note 4)	SAFETY STANDARDS	UL60950-1, CB(IEC60950-1) Approved
	WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
	EMI CONDUCTION & RADIATION	Compliance to EN55022 (CISPR22) Class B
	HARMONIC CURRENT	Compliance to EN61000-3-2,-3
	EMS IMMUNITY	Compliance to EN61000-4-2, 3, 4, 5, 6, 8,11, ENV50204, EN55024, EN61000-6-1 Light industry level, criteria A
OTHERS	MTBF	402.7Khrs min. MIL-HDBK-217F (25 )
	DIMENSION	99*97*36mm (L*W*H)
	PACKING	0.36Kg; 45pcs/17.2Kg/0.93CUFT
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25oCof ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 20% to 100% rated load, and other output at 60% rated load. 6. Each output can work within current range. But total output power can not exceed rated output power. 7. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

orte

Grupos de Producto : Fuente de alimentación conmutada de salida única