Fuente de alimentación de interruptor de alta calidad Wxe-35net-C

Modelo NO .: WXE-35NET-C Garantía:> 2 años Voltaje de entrada: 15V Modo de inicio: Autoconfigurado Fuente de alimentación conmutada Sistema de suministro de energía: Terminal Sistema de modulación de equipos de alimentación: PFAW Marca: Omwo Paquete de transporte: Embalaje de exportación estándar Origen: Zhejiang Tipo de salida: Potencia de salida única: 1 - 50W Modo de conexión: Serie Cambio Voltaje de suministro de energía Modo de regulación: Tipo de modulación de frecuencia Transmisión de energía: Transmisión bidireccional Certificación: CE, UL, RoHS, ISO, CCC, CB, CSA Marca: OMWO Pliego de condiciones: 159 * 98 * 38 mm HS código: 8504401990 entrada universal de CA / gama completa \ nProtecciones: cortocircuito / sobrecarga / sobretensión \ n refrigeración por convección de aire libre \ n100% prueba de quemadura de carga completa \ n2 años de garantía \ nespecificación:

MODEL		WXE-35NET-C
OUTPUT	OUTPUT NUMBER	CH1	CH2	CH3
	DCVOLTAGE	5V	15V	-15V
	RATEDCURRENT	2.5A	1A	0.5A
	CURRENTRANGE	0.5~3.5A	0.1-1.5A	0.1-0.5A
	RATED POWER	35W
	RIPPLE&NOISENOTE.2	80MVP-P	150mVp-p	150mVp-p
	VOLTAGEADJ.RANGE	CH1: 4.75~5.5V
	VOLTAGETOLERANCENOTE.3	±2.0%	±8.0%	±8.0%
	LINEREGULATION	±0.5%	±1.0%	±1.0%
	LOADREGULATION	±1.5%	±3.0%	±3.0%
	SETUP.RISEHOLD.TIME	500ms,30ms/230VAC ,1200ms, 30ms/115VAC at full load
	HOLD TIME	50ms/230vac  10ms/115vac at full load
INPUT	VOLTAGERANGE	85~264VAC  120~370VDC
	FREQUENCYRANGE	47~63HZ
	EFFICIENCY	79%
	AC CURRENT	0.75A/115vac    0.5A/230VAC
	INRUSH CURRENT	COLD START 45A
	LEAKAGECURRENT	<2mA/240VAC
PROTECTION	OVERLOAD	110~150% rated outputpower
		Protection type:Hiccup mode,recovers automatically after fault condition is removed
	OVER VOLTAGE	CH1:5.75~6.75V
		Protection typeShut odown o/p voltage,re-power on to recover
ENVIRONMENT	WORKINGTIMP	-20~+60°C (Refer to "Derating Curve")
	WORKINGHUMIDITY	20~90% RH non-condensing
	STORAGE TEMP HUMIDITY	-40~+85°C 10~95%RH
	TEMPCOEFFICIENT	±0.03%/°C (0~45°C )
	VIBRATION	10~500HZ,2G10min/1cycle period for 60 min each alongX,Y,Zaxes
SAFETY&EMC	SAFETYSTANDARDS	UL60950-1 Approved,CB Approved by TUV(design Refer to IEC 60950-1)
	WITHSTAND VOLTAGE	1/P-0/P:3KVAC 1/P-FG:2KVAC 0/P-FG:0.5KVAC
	ISOLATIONRESISTANCE	1/P-0/P,1/P-FG,0/P-FG:100M Ohms/500VDC/25°C/70%RH
	EMI CONDUCTICN&	Compliance to EN55022(CISPR22) Class B
	RADIATION
	HARMONICCURRENT	Compliance to EN61000-3-2,-3
	EMS IMMUNITY	Compliance to EN61000-4-2,3,4,5,6,8,11 ENV50204,EN50204,EN61000-6-1 Light industry level criteria A
QTHERS	MTBF	386.2 Khrs min MIL-HDBK-217F(25°C)
	DIMENSION	99*97*36mm(L*W*H)
	PACKING	0.36Kg ;45pcs / 17.2Kg / 0.9CUFT
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
	2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
	3. Tolerance : includes set up tolerance, line regulation and load regulation.
	4. Line regulation is measured from low line to high line at rated load.
	5. Load regulation is measured from 0% to 100% rated load.
	6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.For Guidance on how to perform these EMC tests.please refer to "EMI testing of component power supplies"

orte

Grupos de Producto : Fuente de alimentación conmutada de salida única